From 59bbb85f0068636cc1f4956c3c166c6013b5d4c3 Mon Sep 17 00:00:00 2001 From: Axel Schwenke Date: Thu, 10 Dec 2020 15:21:16 +0100 Subject: [PATCH] use system wide i2c-dev.h instead of local copy --- i2c-dev.h | 361 ------------------------------------------------------ 1 file changed, 361 deletions(-) delete mode 100644 i2c-dev.h diff --git a/i2c-dev.h b/i2c-dev.h deleted file mode 100644 index 415ab45..0000000 --- a/i2c-dev.h +++ /dev/null @@ -1,361 +0,0 @@ -/* - i2c-dev.h - i2c-bus driver, char device interface - - Copyright (C) 1995-97 Simon G. Vogl - Copyright (C) 1998-99 Frodo Looijaard - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* $Id: i2c-dev.h,v 1.4 2003/11/27 23:08:06 tat Exp $ */ - -#ifndef LIB_I2CDEV_H -#define LIB_I2CDEV_H - -#include -#include - - -/* -- i2c.h -- */ - - -/* - * I2C Message - used for pure i2c transaction, also from /dev interface - */ -struct i2c_msg { - __u16 addr; /* slave address */ - unsigned short flags; -#define I2C_M_TEN 0x10 /* we have a ten bit chip address */ -#define I2C_M_RD 0x01 -#define I2C_M_NOSTART 0x4000 -#define I2C_M_REV_DIR_ADDR 0x2000 -#define I2C_M_IGNORE_NAK 0x1000 -#define I2C_M_NO_RD_ACK 0x0800 - short len; /* msg length */ - char *buf; /* pointer to msg data */ - int err; - short done; -}; - -/* To determine what functionality is present */ - -#define I2C_FUNC_I2C 0x00000001 -#define I2C_FUNC_10BIT_ADDR 0x00000002 -#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */ -#define I2C_FUNC_SMBUS_HWPEC_CALC 0x00000008 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_READ_WORD_DATA_PEC 0x00000800 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_WRITE_WORD_DATA_PEC 0x00001000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_PROC_CALL_PEC 0x00002000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL_PEC 0x00004000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_QUICK 0x00010000 -#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 -#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000 -#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000 -#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000 -#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000 -#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000 -#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000 -#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 -#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 -#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */ -#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */ -#define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 0x10000000 /* I2C-like block xfer */ -#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2 0x20000000 /* w/ 2-byte reg. addr. */ -#define I2C_FUNC_SMBUS_READ_BLOCK_DATA_PEC 0x40000000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC 0x80000000 /* SMBus 2.0 */ - -#define I2C_FUNC_SMBUS_BYTE I2C_FUNC_SMBUS_READ_BYTE | \ - I2C_FUNC_SMBUS_WRITE_BYTE -#define I2C_FUNC_SMBUS_BYTE_DATA I2C_FUNC_SMBUS_READ_BYTE_DATA | \ - I2C_FUNC_SMBUS_WRITE_BYTE_DATA -#define I2C_FUNC_SMBUS_WORD_DATA I2C_FUNC_SMBUS_READ_WORD_DATA | \ - I2C_FUNC_SMBUS_WRITE_WORD_DATA -#define I2C_FUNC_SMBUS_BLOCK_DATA I2C_FUNC_SMBUS_READ_BLOCK_DATA | \ - I2C_FUNC_SMBUS_WRITE_BLOCK_DATA -#define I2C_FUNC_SMBUS_I2C_BLOCK I2C_FUNC_SMBUS_READ_I2C_BLOCK | \ - I2C_FUNC_SMBUS_WRITE_I2C_BLOCK -#define I2C_FUNC_SMBUS_I2C_BLOCK_2 I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 | \ - I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2 -#define I2C_FUNC_SMBUS_BLOCK_DATA_PEC I2C_FUNC_SMBUS_READ_BLOCK_DATA_PEC | \ - I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC -#define I2C_FUNC_SMBUS_WORD_DATA_PEC I2C_FUNC_SMBUS_READ_WORD_DATA_PEC | \ - I2C_FUNC_SMBUS_WRITE_WORD_DATA_PEC - -#define I2C_FUNC_SMBUS_READ_BYTE_PEC I2C_FUNC_SMBUS_READ_BYTE_DATA -#define I2C_FUNC_SMBUS_WRITE_BYTE_PEC I2C_FUNC_SMBUS_WRITE_BYTE_DATA -#define I2C_FUNC_SMBUS_READ_BYTE_DATA_PEC I2C_FUNC_SMBUS_READ_WORD_DATA -#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA_PEC I2C_FUNC_SMBUS_WRITE_WORD_DATA -#define I2C_FUNC_SMBUS_BYTE_PEC I2C_FUNC_SMBUS_BYTE_DATA -#define I2C_FUNC_SMBUS_BYTE_DATA_PEC I2C_FUNC_SMBUS_WORD_DATA - -#define I2C_FUNC_SMBUS_EMUL I2C_FUNC_SMBUS_QUICK | \ - I2C_FUNC_SMBUS_BYTE | \ - I2C_FUNC_SMBUS_BYTE_DATA | \ - I2C_FUNC_SMBUS_WORD_DATA | \ - I2C_FUNC_SMBUS_PROC_CALL | \ - I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \ - I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC | \ - I2C_FUNC_SMBUS_I2C_BLOCK - -/* - * Data for SMBus Messages - */ -#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */ -#define I2C_SMBUS_I2C_BLOCK_MAX 32 /* Not specified but we use same structure */ -union i2c_smbus_data { - __u8 byte; - __u16 word; - __u8 block[I2C_SMBUS_BLOCK_MAX + 3]; /* block[0] is used for length */ - /* one more for read length in block process call */ - /* and one more for PEC */ -}; - -/* smbus_access read or write markers */ -#define I2C_SMBUS_READ 1 -#define I2C_SMBUS_WRITE 0 - -/* SMBus transaction types (size parameter in the above functions) - Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */ -#define I2C_SMBUS_QUICK 0 -#define I2C_SMBUS_BYTE 1 -#define I2C_SMBUS_BYTE_DATA 2 -#define I2C_SMBUS_WORD_DATA 3 -#define I2C_SMBUS_PROC_CALL 4 -#define I2C_SMBUS_BLOCK_DATA 5 -#define I2C_SMBUS_I2C_BLOCK_DATA 6 -#define I2C_SMBUS_BLOCK_PROC_CALL 7 /* SMBus 2.0 */ -#define I2C_SMBUS_BLOCK_DATA_PEC 8 /* SMBus 2.0 */ -#define I2C_SMBUS_PROC_CALL_PEC 9 /* SMBus 2.0 */ -#define I2C_SMBUS_BLOCK_PROC_CALL_PEC 10 /* SMBus 2.0 */ -#define I2C_SMBUS_WORD_DATA_PEC 11 /* SMBus 2.0 */ - - -/* ----- commands for the ioctl like i2c_command call: - * note that additional calls are defined in the algorithm and hw - * dependent layers - these can be listed here, or see the - * corresponding header files. - */ - /* -> bit-adapter specific ioctls */ -#define I2C_RETRIES 0x0701 /* number of times a device address */ - /* should be polled when not */ - /* acknowledging */ -#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */ - - -/* this is for i2c-dev.c */ -#define I2C_SLAVE 0x0703 /* Change slave address */ - /* Attn.: Slave address is 7 or 10 bits */ -#define I2C_SLAVE_FORCE 0x0706 /* Change slave address */ - /* Attn.: Slave address is 7 or 10 bits */ - /* This changes the address, even if it */ - /* is already taken! */ -#define I2C_TENBIT 0x0704 /* 0 for 7 bit addrs, != 0 for 10 bit */ - -#define I2C_FUNCS 0x0705 /* Get the adapter functionality */ -#define I2C_RDWR 0x0707 /* Combined R/W transfer (one stop only)*/ -#define I2C_PEC 0x0708 /* != 0 for SMBus PEC */ -#if 0 -#define I2C_ACK_TEST 0x0710 /* See if a slave is at a specific address */ -#endif - -#define I2C_SMBUS 0x0720 /* SMBus-level access */ - -/* -- i2c.h -- */ - - -/* Note: 10-bit addresses are NOT supported! */ - -/* This is the structure as used in the I2C_SMBUS ioctl call */ -struct i2c_smbus_ioctl_data { - char read_write; - __u8 command; - int size; - union i2c_smbus_data *data; -}; - -/* This is the structure as used in the I2C_RDWR ioctl call */ -struct i2c_rdwr_ioctl_data { - struct i2c_msg *msgs; /* pointers to i2c_msgs */ - int nmsgs; /* number of i2c_msgs */ -}; - - -static inline __s32 i2c_smbus_access(int file, char read_write, __u8 command, - int size, union i2c_smbus_data *data) -{ - struct i2c_smbus_ioctl_data args; - - args.read_write = read_write; - args.command = command; - args.size = size; - args.data = data; - return ioctl(file,I2C_SMBUS,&args); -} - - -static inline __s32 i2c_smbus_write_quick(int file, __u8 value) -{ - return i2c_smbus_access(file,value,0,I2C_SMBUS_QUICK,NULL); -} - -static inline __s32 i2c_smbus_read_byte(int file) -{ - union i2c_smbus_data data; - if (i2c_smbus_access(file,I2C_SMBUS_READ,0,I2C_SMBUS_BYTE,&data)) - return -1; - else - return 0x0FF & data.byte; -} - -static inline __s32 i2c_smbus_write_byte(int file, __u8 value) -{ - return i2c_smbus_access(file,I2C_SMBUS_WRITE,value, - I2C_SMBUS_BYTE,NULL); -} - -static inline __s32 i2c_smbus_read_byte_data(int file, __u8 command) -{ - union i2c_smbus_data data; - if (i2c_smbus_access(file,I2C_SMBUS_READ,command, - I2C_SMBUS_BYTE_DATA,&data)) - return -1; - else - return 0x0FF & data.byte; -} - -static inline __s32 i2c_smbus_write_byte_data(int file, __u8 command, - __u8 value) -{ - union i2c_smbus_data data; - data.byte = value; - return i2c_smbus_access(file,I2C_SMBUS_WRITE,command, - I2C_SMBUS_BYTE_DATA, &data); -} - -static inline __s32 i2c_smbus_read_word_data(int file, __u8 command) -{ - union i2c_smbus_data data; - if (i2c_smbus_access(file,I2C_SMBUS_READ,command, - I2C_SMBUS_WORD_DATA,&data)) - return -1; - else - return 0x0FFFF & data.word; -} - -static inline __s32 i2c_smbus_write_word_data(int file, __u8 command, - __u16 value) -{ - union i2c_smbus_data data; - data.word = value; - return i2c_smbus_access(file,I2C_SMBUS_WRITE,command, - I2C_SMBUS_WORD_DATA, &data); -} - -static inline __s32 i2c_smbus_process_call(int file, __u8 command, __u16 value) -{ - union i2c_smbus_data data; - data.word = value; - if (i2c_smbus_access(file,I2C_SMBUS_WRITE,command, - I2C_SMBUS_PROC_CALL,&data)) - return -1; - else - return 0x0FFFF & data.word; -} - - -/* Returns the number of read bytes */ -static inline __s32 i2c_smbus_read_block_data(int file, __u8 command, - __u8 *values) -{ - union i2c_smbus_data data; - int i; - if (i2c_smbus_access(file,I2C_SMBUS_READ,command, - I2C_SMBUS_BLOCK_DATA,&data)) - return -1; - else { - for (i = 1; i <= data.block[0]; i++) - values[i-1] = data.block[i]; - return data.block[0]; - } -} - -static inline __s32 i2c_smbus_write_block_data(int file, __u8 command, - __u8 length, __u8 *values) -{ - union i2c_smbus_data data; - int i; - if (length > 32) - length = 32; - for (i = 1; i <= length; i++) - data.block[i] = values[i-1]; - data.block[0] = length; - return i2c_smbus_access(file,I2C_SMBUS_WRITE,command, - I2C_SMBUS_BLOCK_DATA, &data); -} - -/* Returns the number of read bytes */ -static inline __s32 i2c_smbus_read_i2c_block_data(int file, __u8 command, - __u8 *values) -{ - union i2c_smbus_data data; - int i; - if (i2c_smbus_access(file,I2C_SMBUS_READ,command, - I2C_SMBUS_I2C_BLOCK_DATA,&data)) - return -1; - else { - for (i = 1; i <= data.block[0]; i++) - values[i-1] = data.block[i]; - return data.block[0]; - } -} - -static inline __s32 i2c_smbus_write_i2c_block_data(int file, __u8 command, - __u8 length, __u8 *values) -{ - union i2c_smbus_data data; - int i; - if (length > 32) - length = 32; - for (i = 1; i <= length; i++) - data.block[i] = values[i-1]; - data.block[0] = length; - return i2c_smbus_access(file,I2C_SMBUS_WRITE,command, - I2C_SMBUS_I2C_BLOCK_DATA, &data); -} - -/* Returns the number of read bytes */ -static inline __s32 i2c_smbus_block_process_call(int file, __u8 command, - __u8 length, __u8 *values) -{ - union i2c_smbus_data data; - int i; - if (length > 32) - length = 32; - for (i = 1; i <= length; i++) - data.block[i] = values[i-1]; - data.block[0] = length; - if (i2c_smbus_access(file,I2C_SMBUS_WRITE,command, - I2C_SMBUS_BLOCK_PROC_CALL,&data)) - return -1; - else { - for (i = 1; i <= data.block[0]; i++) - values[i-1] = data.block[i]; - return data.block[0]; - } -} - - -#endif /* LIB_I2CDEV_H */